3d printable Traveller Ship Designs

[Topaz172]

OK, get your printers warmed up here are the Crysanthemum and Fer De Lance
https://www.thingiverse.com/thing:7066839
https://www.thingiverse.com/thing:7066858

 

[Topaz172]

Big Update

The Snow class tail-sitter

HTT-025 Snow Class Tail sitter by Tuaththua

A starship design inspired by Herge's TinTin graphic novel 'Destination Moon'.This is a solid STL and therefore rescalable

www.thingiverse.com

The Arakoine class strike cruiser

Arakoine Class Imperial Strike Cruiser by Tuaththua

The Arakoine is a 50,000 Dton plantary assault cruiser inspired by the Traveller RPG illustrations. This 'Thing' has three parts and a stand

www.thingiverse.com

The Vulture Class Scavenger (pirates of Drinax)

Vulture Class Scavenger ship by Tuaththua

A Vulture Class Scavenger ship favoured by pirates in Trojan Reach, based on Mongoose's 'Pirates of Drinax' (a Traveller RPG ship)A solid Stl and stand. (ship in claw not included)

www.thingiverse.com

and Finally the Homestead Class modular space station. My own design, this station is funtionally modular, you can choose to print it as a 100% space farm, 100% fuel depot, factory, retail, repair yard or a combination of any of the modules attached to a core.

Homestead Class Modular Space Station by Tuaththua

A space station of my own design. The Homestead is built to accomodate a range of different modules allowing for unique customisation. Whether you want a station that is entirely a farm, factory, system defense base, or a mix there is a module for it.This 'thing' is a collection of parts...

www.thingiverse.com

 

[jec10]

Have printed your Fer de lance and Chrysanthemum on my Bambu Labs A1 Mini. I printed them with the bodies scaled to 50mm long each.

Unfortunately the bottoms are a bit messy - have you printed them and if so which orientation did you use?

 

[Topaz172]

The Kinunir for 3D printing...

https://www.thingiverse.com/thing:7320616

Here is a song that I wrote...
The Ballad of the Kinunir
Patrolling in The Dark and the Deep Sectors, using an experimental Black Globe shield generator, the INS Kinunir desperately flees a squadron of Aslan Ihatae by flying through a star (hell). Whilst the immediate crisis is past the ship is stuck in jump space, doomed to wander for eternity trying to 'jump the boat down' to normal space. - A semi-mythincal ghost ship of the Spinward Main. (traveller RPG)

The Ballad of the Kinunir

Listen and make your own on Suno.

suno.com

 

[Topaz172]

And The Lab Ship...

https://www.thingiverse.com/thing:7320625

You will need some sowing needles and a micro-drill to in order to attach the sensor antenae which are too delicate for regular 3dprint, I recommend threading insulated wires into the vertical linkage to give the look of exposed gubbins.

 

[Topaz172]

Have printed your Fer de lance and Chrysanthemum on my Bambu Labs A1 Mini. I printed them with the bodies scaled to 50mm long each.

Unfortunately the bottoms are a bit messy - have you printed them and if so which orientation did you use?

I can't guarantee anything that's been scaled smaller.

 

[jec10]

I can't guarantee anything that's been scaled smaller.

Okay thanks. Just thought I'd ask what orientation you used for your printing.