Traveller Store CotI Features New Posts Mark Forums Read Register

Go Back > Citizens of the Imperium > General Traveller Discussions > The Fleet

The Fleet Ship designs, strategies, and tactics.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old November 29th, 2015, 10:37 PM
wbyrd's Avatar
wbyrd wbyrd is offline
Citizen: SOC-13
Join Date: Jun 2014
Posts: 602
Gallery : 0
wbyrd Citizen++wbyrd Citizen++wbyrd Citizen++wbyrd Citizen++wbyrd Citizen++
Default 100 ton Missile bay: possible configuration

As part of my project I thought i would do the big dady of missile launchers, the 100 ton bay.

Up front I will say, i may not have the dimensions exactly right. My ruler in blender is a bit finicky.

s yu can see multiple launch tubes are featured, each box fires one missile at a tie, which is reloaded fromt eh ready ammo stored int eh bay.

Ammo containers are loaded into the reload mechanism which strips individual missile" sticks" out of the container and transfers them by a series of moving clamps. the canisters on the top level are the active canisters. they are emptied, and a new canister replaces it from one of the containers stored in the lower area.

blast panels, separate the levels so that an explosion on the top section will not translate to the lower area...unless a warhead actually detonates then everyone is deep guacamole

As a shipping container is emptied it is cycled out of the bay to a storage area, or ejected from the ship.

As a tube i fired, the spent casing is ejected, and a blast of inert gase is used to ensure everything is kicked out of the tube, and no debris is in the tube. this is to prevent "FOD" from getting jammed up in the works and bringing the whole process to a grinding halt.

in the main body of the bay, is a small fire control station that can be operated locally or slaved to a remote station elsewhere. as is standard the entire assembly takes up about 100 dT, and is armored as well as the rest of the ship.

This model extends out from the hull, however other models may be flush mounted, or even recessed into the hull slightly.

for safety the bay is filled with inert gas, or depressurized to prevent fires, and everything is coated with an anti-static, anti-spark material. and no sources of combustion are allowed in the area.

in theory if loading crew was provided fresh 1 ton conainers could be mved into place as fast as they were emptied, allowing the ship to fire a stead stream of missiles non stop....not sure if that would work int he rules however.

More to come...I can hear the groans from here ..don't worry sooner or later i will get bored of this.

Oh by the way for scale there is a person on the lower deck..if you couldn't make him out..Thats Bob,he'll be helping me out with pics until he figures out I aint paying him.
nihil novi sub sole
nil mortalibus ardui est

Nothing is new, nothing is impossible...
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MT: RM Open Frame Hull Configuration (again) snrdg082102 MegaTraveller 10 October 16th, 2011 11:48 PM
configuration questions JAFARR The Fleet 20 February 9th, 2009 03:46 PM
Hull configuration errata mike wightman Traveller: The New Era 7 December 27th, 2004 04:14 AM
CotI Apache Configuration.... sandman Citizens' Information Centre 0 June 22nd, 2003 02:30 PM
CotI configuration/features... sandman Citizens' Information Centre 0 February 19th, 2003 02:29 PM

This website and its contents are copyright ©2010- Far Future Enterprises. All rights reserved. Traveller is a registered trademark of Far Future Enterprises .
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright (c) 2010-2013, Far Future Enterprises. All Rights Reserved.